Verex Monitor ISM Especificaciones descargar pdf (Pagina 42)

38 MONITOR ISM™/AFx™ IP Connectivity Guide 22-9058 v2.1

5) IP board receiving data, but not

responding (red LED is not pulsing).

The data being received may not be

configured correctly for the panel (such

as incorrect panel serial number

6) IP Board Receiving Data and

Responding (red LED is pulsing in

sync with the green LED) but, still no

communications.

This may mean the

"Remote IP Address" and "Remote

Port" are being used, but have been set

incorrectly. Try disabling this feature

(zero-out these values), and then re-try

communications. If successful, re-

enable this feature using the correct

values (see

4.3.2 for details).

7) NOTE: When an IP Interface Module

is powered for the first time, the

board’s green DIR RX and SIP RX

LED’s will flash alternately to indicate

the board is not

programmed. These

same lights flash on and off together

at the same time when the board is

Discovery Mode and ready to be

programmed.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 51 52

Sin comentarios

Verex Monitor ISM Especificaciones Pagina 42