Verex Monitor ISM Especificaciones descargar pdf (Pagina 28)

24 MONITOR ISM™/AFx™ IP Connectivity Guide 22-9058 v2.1

3.4 ISM / AFx Director Settings for SIP Reporting

• Open and log on to the MONITOR ISM /

AFx Director to configure and download

IP reporting comms to the panel(s).

Notice: You cannot run two copies of the

Director software. Check to ensure this

software is not already running (look for a

Folder/LCD-Keypad

symbol near the right-

hand end of the Windows task-bar).

• (Multi-

Account Systems: Click

[Account Folders] in the 'tree', and

locate and double-click the desired

account for programming.)

• Click your site/account button in the tree.

• Open

Configuration in the 'tree', and ensure "Logical Tree View" is not in effect. If

"System" is the 1

item under "Configuration", right-click Configuration, and de-select

Logical Tree View. Or un-check it from main screen “View”.

• Open the "

System" branch in the tree (under your specific panel), and select

Communication.

• Enter the panel’s account number

that will be used to identify the

panel when it reports to the SIP

Receiver, under Primary

Reporting (Telco) in the Digital

account ID box.

NOTE2: If digital communications is

present with a landline connection,

setting the Mode box as “Digital As

Backup” will switch the system over

to digital reporting if the IP comms

fails.

• Then, set these items (near the

bottom of the screen):



SIP Mode: Reporting Over IP.

(S005:02, 1

item set as 1)

 SIP Address: 01 - 80 (if used)

(S005:02, 2

field/item).

Note: This depends on the con-

nection mode of the IP receiver

software (for details, see

3.5.3).

For details on all settings in this screen, press

F1 while 'in' this System Communications

screen. Then, scroll down to view the desired items. Or consult the “Commissioning

Reference Guide” for keypad programming where applicable (see above Note:

). (For Bell

103 reporting, look for "Primary Reporting (Telco)" selections. To set up a "PCPanel

with IP" connection, see Chapter

2 (previous).

This section assumes that you already

have a basic Director database set up. If

this has not been done yet, refer to the

"Commissioning" section in the on-line

help or User's Guide for the Director

software.

Note1: For systems with no more than

1000 users (panel "Memory Model" setting

≤ 4), these settings can be done through

an LCD keypad if desired. The IP LCD

settings are shown here as well.

LCD

Equiv.

LCD

Equiv.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Comentarios a estos manuales

Sin comentarios

Verex Monitor ISM Especificaciones Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Verex Monitor ISM