Verex MONITOR AFx Guía de usuario descargar pdf (Pagina 183)

500-9041 v4.1

Welcome Report Control Admin

Sys Config

Tech-Ref

177

Card Version (Version-Number)

This feature requires

≥

V3.2

panel firmware

and

≥

V1.5

door/elevator controller module

firmware. For an additional setting, refer to

"AutoUpdate Card Version", under

Special

(to follow).

- Version Required:

This

enables/disables version number

checking (allows fixed-ID cards to be

re-issued if lost or stolen).

- Position:

The starting position of the

version number (1-40).

- Length:

The length of the version

number (MS: 1-2; W: 1-20).

Card ID

- Position:

The starting position of card ID

number (1-40);

- Length:

The length of card ID number (MS: 4-9;

W: 1-32).

32-Bit Cards: Supported with panel firmware

≥

V3.2

and

door/elevator controller module firmware

≥

V1.5

(prev. 20 bit / 6 digits).

V3.2

panels: MaxID=999999999;

≥

V3.31

Panels:

MaxID=4

294

967

295.

- Bits per Card:

The length of the card data in

bits (Wiegand), or characters (magnetic stripe).

This can be up to 40.

- Bits per Character

(magstripe only)

The number

of bits used to identify each character of data on

a magstripe card (future use; fixed as

Odd Parity

These settings pertain to odd-parity checking, which

helps to identify card 'misreads'.

- Position:

The position of the odd-parity

'checksum' (1-40);

-Start:

The starting position of the data being

checked for odd-parity (1-40);

- Length:

The number of digits being checked for

odd-parity (1-40).

Even Parity

These settings pertain to even-parity checking, which

helps to identify card 'misreads'.

- Position:

The position of the even-parity

'checksum' (1-40);

-Start:

The starting position of the data being

checked for even-parity (1-40);

- Length:

The number of digits being checked for

even-parity (1-40).



Special



(Miscellaneous Items)

-Door Fallback Mode:

Cards to be granted

access if the door controller module is unable

to communicate with the main MONITOR AFx

panel database:

•

None:

No cards/tokens accepted;

•

Valid Token Format:

All readable

cards/tokens accepted;

•

Valid Site Code:

All cards/tokens with the

correct site code will be granted access;

•

10 Fall-back Users:

Only the users who are

assigned as 'FallBack Users'. For details,

refer to "Fall-Back Users...".

-Unlock All Doors On Fire Alarm:

If selected,

all doors in all areas associated with this

panel will automatically unlock when a fire

alarm is detected by this panel.

-AutoUpdate Card Version:

For fixed-ID

cards with a version number, this sets how re-

issued cards are to be handled.

= Grant access to a card with higher version

number, and update the version number for the

specific user automatically;

= Only cards that match the version number for

each user will be granted access (must update

manually when a card is re-issued).

To set the initial/actual version number for specific

card(s), refer to the section on "Users".

For additional related settings, refer to "Card Version"

(previous). Panel Version: This feature requires

≥

V3.2

panel firmware.

Configuration

System

Access

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 323 324

Comentarios a estos manuales

Sin comentarios

Verex MONITOR AFx Guía de usuario Pagina 183

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Verex MONITOR AFx